Composite Arf Cross-over header installation
06-29-2005 | 09:23 AM
#1
Thread Starter
Junior Member
My Feedback: (1)
Joined: Aug 2002
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
From: SammamishWA
Composite Arf Cross-over header installation
I have the 3.1M Super Extra and I am going to install the cross-over headers with K&S canisters. Does anyone know of or have pictures of such an installation?
Thanks in advance,
Tony
Thanks in advance,
Tony
06-30-2005 | 01:10 PM
#2
My Feedback: (50)
Joined: Feb 2002
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
From: Pasadena,
CA
RE: Composite Arf Cross-over header installation
Do you already have the cross-over headers? I know that Dave and DA still had a few issues to work out with these headers for the DA1fitty before offering them to the large public. Regular headers shortened 1" and the KS110, which are shorter, thicker cans, seem to fit nicely in the 3.1SX.
DKjens
DKjens
06-30-2005 | 02:24 PM
#3
Thread Starter
Junior Member
My Feedback: (1)
Joined: Aug 2002
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
From: SammamishWA
RE: Composite Arf Cross-over header installation
Yes, I do have the headers and cans already. Has anyone successfully installed them? If so, are there pictures?
