2 cycle oil debate
#26
Senior Member
My Feedback: (5)
Join Date: Oct 2002
Location: An Iceburg in, ANTARCTICA
Posts: 6,747
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
ORIGINAL: Rcpilet
Your ALL wrong!!
I've been running bacon grease in one my engines for 2 quarts and thus far, not a single problem. I'm convinced and nuthin' any of you so called "experts" and friends of said "experts" is going to change my mind. I just bought this engine and, while the manufacturer is Polish, I am going to to follow his every word about the oil recommendation and ratio of 5:1 in my $3592.58 motor. After all, who better than the manufacturer to know exactly what kind and ratio of oil to use in my precious engine?
BTW--this is my first gas engine and I'm more of an "expert" than any of you guys with your stupid Zenoahs and DA and ZDZ engines. Your all idiots and I'll be flying this engine for the next 50 years if I live that long.
There!! Now you can all listen to my advice and quit argueing about oil. BACON GREASE!! It puts the PIG in your engine.
[sm=lol.gif]
Your ALL wrong!!
I've been running bacon grease in one my engines for 2 quarts and thus far, not a single problem. I'm convinced and nuthin' any of you so called "experts" and friends of said "experts" is going to change my mind. I just bought this engine and, while the manufacturer is Polish, I am going to to follow his every word about the oil recommendation and ratio of 5:1 in my $3592.58 motor. After all, who better than the manufacturer to know exactly what kind and ratio of oil to use in my precious engine?
BTW--this is my first gas engine and I'm more of an "expert" than any of you guys with your stupid Zenoahs and DA and ZDZ engines. Your all idiots and I'll be flying this engine for the next 50 years if I live that long.
There!! Now you can all listen to my advice and quit argueing about oil. BACON GREASE!! It puts the PIG in your engine.
[sm=lol.gif]
I can confidently say you will screw up your engine. You need to break it in on Bear Fat BEFORE going to the bacon grease.
#27
Senior Member
My Feedback: (4)
Join Date: Jan 2004
Location: Blackfoot ,
ID
Posts: 2,251
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
I was thinking more on the line of Mutton Tallow is easier to obtain than Bear Fat .Grind up a few Pinto beans and have the best of both worlds Sheep oil ummmmmmmmmmm good stuff
#28
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
I just finished reading the article and they did state that the due to the additive packages, you should run the oil/gas ratio at the one recommended by the oil MFG. Running too much or too few additives will cause problems and changes in your results. As we know the additives increase lubrication and decrease deposits. It seems that the caster didn't have any additives so they were just testing the lubrication, power and temperature benefits of caster. If we use another base stock then the additive package is what will determine the mix ratio of the oil!
#30
My Feedback: (1)
Join Date: Apr 2003
Location: Left Coast ,
CA
Posts: 4,890
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
ORIGINAL: jongurley
Its common sense guys ,,, if Amsoil or whoever says mix it at 100:1 then mix the *(&* oil at 100:1,,
Its common sense guys ,,, if Amsoil or whoever says mix it at 100:1 then mix the *(&* oil at 100:1,,
#31
Senior Member
My Feedback: (4)
Join Date: Jul 2002
Location: Somewhere,
DC
Posts: 9,825
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
And if someone like Silversurfer, who has more HOURS flying with engines than most of us will fly in a lifetime, says Amsoil won't cut it, you just might want to give his advice some credence...
Same goes for rcbugman, who tested engines for many hours and reported the results you have seen here...
Same goes for rcbugman, who tested engines for many hours and reported the results you have seen here...
#32
My Feedback: (1)
Join Date: Apr 2003
Location: Left Coast ,
CA
Posts: 4,890
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Ralph, That is why I am trying a couple of different oils Although I never had any problems with Amsoil at 70:1, I do listen to the people with more experience. I have to do a lot of listening
#35
My Feedback: (29)
Join Date: Apr 2003
Location: Goldsboro, NC
Posts: 2,834
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
RCIGN!,,,,,,,,,, so the biggest model airplane performance engine company in the United States reccomends AMSOIL 100:1 but we shouldn't listen to them we should listen to someone who has some "credence" OK<< that sounds right, [sm=tired.gif]
#36
My Feedback: (91)
RE: 2 cycle oil debate
Most of the time I never know what Oil/Mixture I'm using in my engines. When I go to the field, I just use what ever someone has mixed up in their gas can. My engine's seem to run the same, (most of the time) and you just can't beat the price.[sm=wink_smile.gif] Bob
#38
Senior Member
Thread Starter
My Feedback: (117)
Join Date: Dec 2001
Location: Tullahoma, TN
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Grin... What a hoot !!! And all I ask is where is RCbugmans thread... Another grin about here...Brian Smith
PS.. Anyone try fish oil yet??
PS.. Anyone try fish oil yet??
#39
My Feedback: (1)
Join Date: Apr 2003
Location: Left Coast ,
CA
Posts: 4,890
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
I think I going to switch to Bob's oil preference from now on
ORIGINAL: Bob Laine
Most of the time I never know what Oil/Mixture I'm using in my engines. When I go to the field, I just use what ever someone has mixed up in their gas can. My engine's seem to run the same, (most of the time) and you just can't beat the price.[sm=wink_smile.gif] Bob
Most of the time I never know what Oil/Mixture I'm using in my engines. When I go to the field, I just use what ever someone has mixed up in their gas can. My engine's seem to run the same, (most of the time) and you just can't beat the price.[sm=wink_smile.gif] Bob
#40
My Feedback: (13)
Join Date: Feb 2002
Location: lewisville,
TX
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
my 2 cents worth. i run all my engines on motul grand prix 2t special comp oil at 80/1. full synthetic been running it for years on my airplanes and my weed eater and blower. one can serves them all. and all engines still look like they are new off the showroom floor. brisons for the a/c.. echo for the lawn equip. all engines were run at this ratio from day one. and run better with time. thats my combo and i am sticking with it.
RCIGN and silversurfer.... 2 people on here that know.....listen to them!!!!
RCIGN and silversurfer.... 2 people on here that know.....listen to them!!!!
#42
Senior Member
My Feedback: (4)
Join Date: Jul 2002
Location: Somewhere,
DC
Posts: 9,825
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Building thousands of engines is not a guarantee that a company knows it all...Remember the four cylinder Chevy Vega with a cast iron head/aluminum block or the converted to diesel V8s ? Early Mazda rotary ? Or maybe the East German Wartburg or Russian Trabant two strokes...How about the Yugo ?
DA does not have a lock on two stroke engine technology...
DA does not have a lock on two stroke engine technology...
#43
My Feedback: (69)
Join Date: Jul 2002
Location: Fort Smith,
AR
Posts: 3,779
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
ORIGINAL: jongurley
RCIGN!,,,,,,,,,, so the biggest model airplane performance engine company in the United States reccomends AMSOIL 100:1 but we shouldn't listen to them we should listen to someone who has some "credence" OK<< that sounds right, [sm=tired.gif]
RCIGN!,,,,,,,,,, so the biggest model airplane performance engine company in the United States reccomends AMSOIL 100:1 but we shouldn't listen to them we should listen to someone who has some "credence" OK<< that sounds right, [sm=tired.gif]
#45
Senior Member
My Feedback: (4)
Join Date: Jul 2002
Location: Somewhere,
DC
Posts: 9,825
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Anybody take the time to read the test by Gordon Jennings ? They spent hours with a Suzuki on a dyno monitoring everything possible, and found that 15-1 gave it the most power
Credence, anyone ?...
Credence, anyone ?...
#47
My Feedback: (30)
Join Date: Jan 2002
Location: Ithaca, NY
Posts: 1,018
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Hi,
It is all about work load and the "wear out" time line. I put my engines through the max workload and need lots of oil for lubrication and perhaps cooling. Silversurfer puts his engines through the "long wear timeline" where if wear is not held to a minimum, engine failure costs big bucks and engine repair becomes a greater cost. As stated before, most hobby applications baby the engine and the engine impacts mother earth long before it sees a hundred hours. Light duty and short run life allows engines to "work with" marginal lubrication.
Elson
It is all about work load and the "wear out" time line. I put my engines through the max workload and need lots of oil for lubrication and perhaps cooling. Silversurfer puts his engines through the "long wear timeline" where if wear is not held to a minimum, engine failure costs big bucks and engine repair becomes a greater cost. As stated before, most hobby applications baby the engine and the engine impacts mother earth long before it sees a hundred hours. Light duty and short run life allows engines to "work with" marginal lubrication.
Elson
#48
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
Hey,
The cosworth engine in the Vega was a great engine.
You just had to keep it cool.
Change the thermostat on the engine to one that is 180 degrees or lower and your engine will last a long time.
The cosworth engine in the Vega was a great engine.
You just had to keep it cool.
Change the thermostat on the engine to one that is 180 degrees or lower and your engine will last a long time.
ORIGINAL: RCIGN1
Building thousands of engines is not a guarantee that a company knows it all...Remember the four cylinder Chevy Vega with a cast iron head/aluminum block or the converted to diesel V8s ? Early Mazda rotary ? Or maybe the East German Wartburg or Russian Trabant two strokes...How about the Yugo ?
DA does not have a lock on two stroke engine technology...
Building thousands of engines is not a guarantee that a company knows it all...Remember the four cylinder Chevy Vega with a cast iron head/aluminum block or the converted to diesel V8s ? Early Mazda rotary ? Or maybe the East German Wartburg or Russian Trabant two strokes...How about the Yugo ?
DA does not have a lock on two stroke engine technology...
#49
Senior Member
Join Date: Oct 2002
Location: tel avivna, ISRAEL
Posts: 1,687
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
me i run all my engines at 40:1 motul 800 and thats it - ZDZ.DA,3W and MVVS - all ok now, no high temps just a little black spitting from mufflers and thats it - Yes i have read all the stuff or most of it - thats why my conclusion!!
#50
My Feedback: (97)
Join Date: Jun 2005
Location: Xenia,
OH
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
RE: 2 cycle oil debate
I just recently switched to Pennzoil Air Cooled after reading this article: http://www.ultralightnews.com/features/oiltest.htm
I would trust that anyone putting their life at risk in an Ultralight aircraft would want a top-grade oil.
P-man.
I would trust that anyone putting their life at risk in an Ultralight aircraft would want a top-grade oil.
P-man.