Need engine identification help!
02-06-2002 | 10:17 PM
#1
Thread Starter
Member
Joined: Dec 2001
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
From: Alamo City, TX
Need engine identification help!
I have a Kawasaki gas engine conversion that I need help identifying.
There is a label on the engine that has:
TA51-MX
Kawasaki Heavy Industries, LTD.
I have tried the Kawasaki web-site with out any success. Most likely it is a discontinued model. It is very large and heavy, apprx. 7 lbs without the carb, coil, and exhaust down spout attached. The back of the crankshaft (opposite end from the flywheel) protudes from the case apprx. 1/2" and has a 5/16" slot through it. A couple of fellows think it came from a leaf-blower, but they are not sure about that. Ankybody out there ever seen one of these conversions?
There is a label on the engine that has:
TA51-MX
Kawasaki Heavy Industries, LTD.
I have tried the Kawasaki web-site with out any success. Most likely it is a discontinued model. It is very large and heavy, apprx. 7 lbs without the carb, coil, and exhaust down spout attached. The back of the crankshaft (opposite end from the flywheel) protudes from the case apprx. 1/2" and has a 5/16" slot through it. A couple of fellows think it came from a leaf-blower, but they are not sure about that. Ankybody out there ever seen one of these conversions?
