TYGON
11-12-2006 | 09:32 PM
#3
My Feedback: (31)
RE: TYGON
You might also consider Aerotrends tubing for gassers it works much better IMO. Neoprene works very well too, and is likely available locally.
http://www.aerotrend.com/shop_subcat...7746c92ffb2f46
http://www.aerotrend.com/shop_subcat...7746c92ffb2f46
11-13-2006 | 08:48 PM
#4
My Feedback: (65)
Joined: Dec 2001
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
From: Orlando, FL
RE: TYGON
ROB--Don't know if this will help you down under but I get mine at McMaster-Carr. http://www.mcmaster.com/ Type in the search engine 5552K22 for the 3/32" ID tubing; 5552K23 gets you the 1/8" ID tubing. 5187K61 is 1/8" ID fuel and lubricant PVC tubing. Least expensive source for fuel and air tubing I've found but then you'll have to email them for shipping costs to get it to you. The Los Angeles, CA office is [email protected]
The New York office is [email protected]
The New York office is [email protected]
