SPE 40cc Problems
10-05-2007 | 01:35 AM
#1
Thread Starter
Joined: Mar 2003
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
From: Queensland, AUSTRALIA
SPE 40cc Problems
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
10-05-2007 | 07:02 PM
#3
Senior Member
Joined: Jan 2007
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
From: Kota KinabaluSabah, MALAYSIA
RE: SPE 40cc Problems
ORIGINAL: Ozmodeller
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
10-05-2007 | 08:28 PM
#4
Senior Member
Joined: Jun 2006
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
From: Miami,
FL
RE: SPE 40cc Problems
ORIGINAL: Ozmodeller
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber ?????? are you sure
send it back
10-07-2007 | 09:05 AM
#5
Senior Member
Joined: Dec 2003
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
From: Ellensburg,
WA
RE: SPE 40cc Problems
I have read about this in a previous posting..
It was covered under warentee... They must not start them
or EVEN TURN THEM OVER at the factory... Hard to believe..[
]
10-08-2007 | 06:11 AM
#6
Joined: Jul 2006
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
From: sunshine coast, AUSTRALIA
RE: SPE 40cc Problems
ORIGINAL: Ozmodeller
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
Guys
Anyone had experience with the following with this engine:
Turning over by hand a notchy feeling as the piston comes to TDC,
Looking through the spark plug hole and it appears that the piston is hitting the combustion chamber,
Some scoring on the piston on either side of the exhaust port, and
the engine is brand new!
Thanks in advance
Peter
