US Engines
04-18-2003 | 12:31 AM
#1
Thread Starter
Junior Member
Joined: Mar 2003
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
From: Edgewood , NM,
US Engines
Has anyone used the 35 or 41 cc engines from us engines? I'm looking to replace a magnum 120 4c in a Rascal 110 What suggestions would you guys have? The cost of the US engines @ about 250.00 is really appealing.
04-18-2003 | 12:37 AM
#2
My Feedback: (77)
Joined: Dec 2001
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
From: Rineyville,
KY
US Engines
I have a 25 and 41. I personally like them very much.
I saw a Rascal 110 with a Zenoa 26 on the nose, in Muncie a month ago. It had plenty of power. The us 41 migh tbe too big. It depends on your tastes, I guess.
I saw a Rascal 110 with a Zenoa 26 on the nose, in Muncie a month ago. It had plenty of power. The us 41 migh tbe too big. It depends on your tastes, I guess.
04-18-2003 | 11:38 AM
#3
US Engines
I run a saito 120 in my Rascall 110. Great balance of power and control. Balanced with no weight. I cant imagine a gasser on the front. Seems you'd have to add a bunch of led in the back.
Edwin
Edwin
04-19-2003 | 04:07 AM
#4
Senior Member
My Feedback: (1)
Joined: Dec 2002
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
From: Gaston, OR,
US Engines
my us 35 runs perfect I couldnot ask for more from a inexpensive engine and mine is 4 years old and has about 10 gallons through it but if I was to buy another it would be the new zenoah g26 more power lighter and not much more money.
at least check them out before you buy
Darin
at least check them out before you buy
Darin
