Community
Search
Notices
Gas Engines Questions or comments about gas engines can be posted here

Evolution 26GT

Thread Tools
 
Search this Thread
 
Old 09-02-2008 | 06:02 PM
  #1  
Thread Starter
Junior Member
 
Joined: Sep 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
From: International Falls, MN
Default Evolution 26GT

Hey all

I have an evolution 26gt that is the bain of my existence. I have it mounted on a UCD 60. We got one flight about 6 mins and it deadsticked. Got it back on the ground and now it will only fire and run for a few seconds then die. I have cleaned the carb checked plug gap, changed fuel lines, checked the mag gap, and I am absolutely baffelled as to what the issue is. Is there anyway to test the ignition to see if that is the problem. I have been through everything else and I am not sure where to go next. When the engine fires and runs for a few seconds the LED on the module stays lighted. I called Horizon today and they were useless. all I got was to send the engine into them and they would fix/ replace what ever the problem was for a nominal fee. I bought this engine second hand and I am sure that the warranty has ticked off it. Anyone got any suggestions. So far this is my first gas engine and I am thinking of stickin with GLOW!!!! any help is greatly appreciated. Cheers,

Tom
Old 09-02-2008 | 10:32 PM
  #2  
 
Joined: Jan 2007
Posts: 1,020
Likes: 0
Received 0 Likes on 0 Posts
From: Muscle Shoals, AL
Default RE: Evolution 26GT


ORIGINAL: TomBat74

Hey all

I have an evolution 26gt that is the bain of my existence. I have it mounted on a UCD 60. We got one flight about 6 mins and it deadsticked. Got it back on the ground and now it will only fire and run for a few seconds then die. I have cleaned the carb checked plug gap, changed fuel lines, checked the mag gap, and I am absolutely baffelled as to what the issue is. Is there anyway to test the ignition to see if that is the problem. I have been through everything else and I am not sure where to go next. When the engine fires and runs for a few seconds the LED on the module stays lighted. I called Horizon today and they were useless. all I got was to send the engine into them and they would fix/ replace what ever the problem was for a nominal fee. I bought this engine second hand and I am sure that the warranty has ticked off it. Anyone got any suggestions. So far this is my first gas engine and I am thinking of stickin with GLOW!!!! any help is greatly appreciated. Cheers,

Tom


To all potential Evolution 26 GT puchasers.

The ignition is junk, new or used. There is a thread on here where someone uses the RCIGN ignition system with excellent results. Do not spend money for a new ignition from Horizon.

Hope this helps, Tom. But really, i don't know the number of people who have nearly been banned from RCU over this engine.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.