Engine ID help needed
#1
Thread Starter
Junior Member
Joined: Mar 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
From: sparks,
NV
I got this at a rc show and the guy didnt know what brand it was.
it has 3 rings, about a 30 cc engine
on the back casting it has a grey hound in an oval
and it looks like 3 penants in a square
Any ideas ?
it has 3 rings, about a 30 cc engine
on the back casting it has a grey hound in an oval
and it looks like 3 penants in a square
Any ideas ?
#5

My Feedback: (49)
Joined: Oct 2002
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
From: Superior,
AZ
Its a 40cc Echo.
Might have been my response in that thread.I have an original new prop hub and the spec sheet [sales pamphlet].
This was from a person in Ohio that had an engine,hobby shop combo.I know of one person here in the conversion forum that has one also.
Gibbs Hobby and Reaserch was the name.He custom converted Echo engines.
If ya need any help.hollar.
Might have been my response in that thread.I have an original new prop hub and the spec sheet [sales pamphlet].
This was from a person in Ohio that had an engine,hobby shop combo.I know of one person here in the conversion forum that has one also.
Gibbs Hobby and Reaserch was the name.He custom converted Echo engines.
If ya need any help.hollar.




