Ive had it with the Tillotson carb on my engine, ive never had problems like this before....to make a long story short, which walbro carb would fit my 3W80Xi?

A fact of life here is that any carb for this engine is going to be well over $100

WJ-64-1 with a 17.46mm venturi

well i richened up the low like suggested in previous thread i made a couple of weeks ago to whee the throttle response was slow, i redid the tank. and im still having the same problem, i can get it to purr like a kitten on the ground....then when it comes time to land i chop the throttle and its "idling" so high it is still flying. Ive never had this problem in my whole life im willing to pay for a carb that will work

I don't have a 3W80 and only about half the 3W web site works. I'm not able to cross reference anything So the carb I listed above may not be the most ideal substitution

Thanks W8ye, i guess i give Bobby at Cactus a call Monay, if no luck Gerhardt at AI......I know that there are several guys that do run Walbros on their 3ws but, dont list the model # they used