BME exhaust
06-17-2010, 09:53 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Marysville, CA
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
BME exhaust
First header-canister and looking for info and setup, BME 58 Extreme. Canister make, header-length. I can weld header parts to make my own header.
Thanks
Tom P
Thanks
Tom P
06-17-2010, 10:04 PM
#2
Senior Member
My Feedback: (31)
Join Date: Mar 2002
Location: Kannapolis,
NC
Posts: 7,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: BME exhaust
http://www.macspro.com/CanMufs.asp
Flex Adapter & Motor Connecter Price Stock #
BME 58/116 - 30°down + connector 79.95 0671
in-testing
BME 58/116 - 135° around & in/25°up + connector
(This will facilitate a wrap-to-center system) 105.95 0672
in-testing
These Flex Systems, uses 1"id Stainless Steel Flex Hose, this hose is made with corrugation-threads the entire length of the hose and can be cut at any point an threaded into our connectors.
Flex Adapter & Motor Connecter Price Stock #
BME 58/116 - 30°down + connector 79.95 0671
in-testing
BME 58/116 - 135° around & in/25°up + connector
(This will facilitate a wrap-to-center system) 105.95 0672
in-testing
These Flex Systems, uses 1"id Stainless Steel Flex Hose, this hose is made with corrugation-threads the entire length of the hose and can be cut at any point an threaded into our connectors.
