RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)
-   -   GT33 quits running. (https://www.rcuniverse.com/forum/gas-engines-142/11173517-gt33-quits-running.html)

mbordeman 07-29-2012 12:19 PM

GT33 quits running.
 
My OS GT33 likes to stop running pretty much every time I land. Or, if it doesn't quit, it "sags" to a point where I have to bump the throttle to keep it idleing. Anybody else fighting this problem??

TimBle 07-29-2012 11:00 PM

RE: GT33 quits running.
 
A club mate of mine is having trouble maintaining idle. It appears to be one of the "quirks" of this engine during running in. It either idles to high after a run or it quits.

Lifer 07-30-2012 01:59 AM

RE: GT33 quits running.
 
Just my opinion, but the low-end sounds lean or it's overheated.

ahicks 07-30-2012 03:41 AM

RE: GT33 quits running.
 
Rich engines seldom quit..... and they don't suffer from that "high idle hang" thing either. That's nothing special to this engine. Pretty well documented in the DLE 20 and 30 strings as well. Especially the 20 cc, but that has a lot to do with their ignition module.

jasburrito 07-30-2012 06:46 AM

RE: GT33 quits running.
 
Another. Seems rich engines with no load at idle will load up and stall.

john josey 07-30-2012 08:43 AM

RE: GT33 quits running.
 
Myself and a friend have both ran our 33's for the first time at the weekend and they both suffer from rough running at the bottom end. We spent all day saturday adjusting the needles which made no difference, so it does appear to be just a quirk of this engine. Lets hope it settles down after it's run-in.

It run's well down to 2200rpm, it's below that the issue starts. My friend was first to run his and at first he thought the throttle servo was the culprit.

Kimhoff 07-30-2012 04:53 PM

RE: GT33 quits running.
 
Check the reed leafs and make sure they are sealing.


All times are GMT -8. The time now is 07:27 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.