RCU Forums - MLD 35 problems

RCU Forums (https://www.rcuniverse.com/forum/)

- Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)

- - MLD 35 problems (https://www.rcuniverse.com/forum/gas-engines-142/11249104-mld-35-problems.html)

russbanner

10-02-2012 07:38 PM

MLD 35 problems

My MLD 35 will not suck fuel with the choke closed. I have to prime it to start.
Any suggestions on solving this problem?
Thanks

3136	10-03-2012 12:19 AM

RE: MLD 35 problems

Check the reeds, if they are not closing properlyit will not draw fuel.
Unscrew the 2 bolts holding the carb on and look at the reeds, if there is a gap it needs to be corrected.
Also sometimes the black insulator block can be cracked, or the screws not tight and drawing air.
Regards Mark

russbanner

10-03-2012 08:37 AM

RE: MLD 35 problems

Thanks Mark,
I will check as you suggest,
Russ

BarracudaHockey

10-03-2012 08:42 AM

RE: MLD 35 problems

Also make sure the choke plate is closing completely, and if you have to, solder over the hole.

Check the reed seating first though.

e-fly

12-29-2012 07:29 AM

RE: MLD 35 problems

CERMARK is no longer the distributor of MLD , any question please contact MLD([email protected]) or SDShobby

All times are GMT -8. The time now is 02:17 AM.