RCU Forums - G26 throttle

RCU Forums (https://www.rcuniverse.com/forum/)

- Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)

- - G26 throttle (https://www.rcuniverse.com/forum/gas-engines-142/1810716-g26-throttle.html)

4 stroken ron

05-13-2004 12:02 AM

G26 throttle

Does the G26 use a straight on throttle push rod or does it have to use a bell crank?
Thanks for any help.
Ron

Tired Old Man

05-13-2004 12:35 AM

RE: G26 throttle

You have to install a bellcrank. Good engine, but the throttle set up could have been improved when they upgraded the engine.

H. Wayne S

05-13-2004 05:38 AM

RE: G26 throttle

I did not use a bellcrank on my instillation, Just installed a 1/16 ball link and nylon rod. Make sure you read the instructions on what is right end up on the carb and there should be no problems.

TimR-RCU

05-13-2004 02:32 PM

RE: G26 throttle

You have your choice. G26 ships with carb block that rotates the carb to allow a straight shot for a throttle linkage, as well as the original if you want to use a bellcrank.

Tim

All times are GMT -8. The time now is 07:17 AM.