RCU Forums - g23 bogging down

RCU Forums (https://www.rcuniverse.com/forum/)

- Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)

- - g23 bogging down (https://www.rcuniverse.com/forum/gas-engines-142/2177188-g23-bogging-down.html)

sgtshultz

09-15-2004 08:57 PM

g23 bogging down

g23 that starts and idles fine (idle a smiggin rough) that boggs down just below half throttle..... suggestions?

ZM2000

09-16-2004 01:40 AM

RE: g23 bogging down

How much is your low and high needles open. Try with 2 turns each and then adjust to get best idle, high and then transition.

If high and low is OK but transition is poor then open the low needle a bit and try for best transition. That will make your idle a bit sluggish being rich, open the throttle a bit to keep it steady bewteen 2000-2500 RPM.

-ZM

Herb Brown

09-16-2004 11:53 AM

RE: g23 bogging down

Have you checked the fuel screen that is inside the carbeurator? It may be partially plugged, causing insufficient fuel flow for higher engine speeds. Check and clean. It is easy to do.

All times are GMT -8. The time now is 10:00 PM.