RCU Forums - DA100 Caeb setting

RCU Forums (https://www.rcuniverse.com/forum/)

- Gas Engines (https://www.rcuniverse.com/forum/gas-engines-142/)

- - DA100 Caeb setting (https://www.rcuniverse.com/forum/gas-engines-142/2370599-da100-caeb-setting.html)

SLINGSHOT-RCU

11-23-2004 09:18 PM

DA100 Caeb setting

Where should the low and high end be set for first run..?

Antique

11-23-2004 10:15 PM

RE: DA100 Caeb setting

Low and High should be at 2 turns open for ANY engine ever made..You start it up, it WILL be too rich on both..You will LEARN to set your carb BEFORE you fly the plane..You WILL NOT damage the engine doing this..Its ELEMENTARY....
Set the high a little rich, then set the low for good transition, then re check the high and go fly....NOTHING TO IT, live a little ....:D

RTK	11-23-2004 10:57 PM

RE: DA100 Caeb setting

Do what Ralph just said.

DENNIS C

11-24-2004 09:28 AM

RE: DA100 Caeb setting

Quote:

ORIGINAL: SLINGSHOT-RCU

Where should the low and high end be set for first run..?

Manaul states 1 3/8 low end & 1 1/2 on high end.

SLINGSHOT-RCU

11-25-2004 10:00 PM

RE: DA100 Caeb setting

Thanks i will start there and tune it in before flight.

All times are GMT -8. The time now is 01:37 PM.