![]() |
100CC new engine?
1 Attachment(s)
just found pic . I think this is the new engine . did not know how big it is. maybe 60CC or 80CC. EVEN 100cc?
|
RE: 100CC new engine?
Looks like a 80cc something another,,,
|
RE: 100CC new engine?
1 Attachment(s)
Is that maybe the YW 48?
edit: or maybe not |
RE: 100CC new engine?
Those look like 1.4ci jugs so the engine will be a 2.8ci twin.
Don't really know of anyone who makes one that size. |
RE: 100CC new engine?
Looks like yet another adaptation of commercial jugs - the carb is a small one --so it is a small engine - nicely done .
|
RE: 100CC new engine?
1 Attachment(s)
OK i spend a few minutes flicking between this pic and the one in the original post and I am pretty sure its a YW, maybe an older version.
Here's a link: http://www.ywengine.com/frame1.htm |
RE: 100CC new engine?
those look like redmax 22cc jugs or older zenoah 23 cc
|
RE: 100CC new engine?
1 Attachment(s)
just for fun . some one doing this. :)
|
RE: 100CC new engine?
what engine is that the single one i am talking about
|
RE: 100CC new engine?
:D:D
|
RE: 100CC new engine?
A Z 23- jug n slug, on a barstock aluminum case ?
|
RE: 100CC new engine?
No way, the exhaust port is too big and there's no intake port on the side of the cylinder...
|
RE: 100CC new engine?
Look at the twin -
Maybe the single is a knock off using the piston/rod |
RE: 100CC new engine?
Boy it looks like a copy of a DA 50
|
RE: 100CC new engine?
ORIGINAL: DENNIS C Boy it looks like a copy of a DA 50 |
RE: 100CC new engine?
That sure does look like half of a BME 110! I am definately not an engine expert but the cooling fins and exhaust port made me immediately think of a 110 [:-]...Jonas
|
RE: 100CC new engine?
Regarding the single. Check out page 2 in the forum, Product Announcements and Manufacturer News. It is a 40cc engine from Melody RC Models. I contacted Tommy about this engine in April and was interested in the motor. He seemed like a nice guy and was even going to give me a real good deal on one. Not knowing anything about the engine I was afraid to take a chance with it on my new airplane. It still looks interesting though. Maybe he'll send me one to test out.;)
|
| All times are GMT -8. The time now is 04:34 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.