Bisson (BCM) Muffler - smoke conversion
 

It seems these Bisson mufflers are getting popular lately, but they don't offer a smoke version that I know of. :confused: So, I decided to experiment with one to see. :D

I have a MDS 1.48 on a H9 Tcraft, and I was looking for a smoke muffler for it, but could not find one. Bisson makes a pitts muffler (not a smoke one though), so I pick one of those up and decided to make my own. :cool: I'll try it out this weekend and see how it does. :confused

Bisson (BCM) Muffler - smoke conversion
 

here's another pic

Bisson (BCM) Muffler - smoke conversion
 

Here is a pic of the intial test run, with a Perry smoke pump. Still need to do some fine tuning of the volume going to the muffler. I am going to try using the pump regulator to ajust the volume. Any suggestions or tips would be appreciated. :D

Bisson (BCM) Muffler - smoke conversion
 

I still need to crank up the smoke oil pressure a bit more. Feeding it in straight from the jug by hand pumping, it smokes up a storm. But with the stock setting, the on board pump is not cranked up enough yet. So I'm going the play with the regulator setting this weekend and see how it does. I'll post some more pics when I get it ajusted a bit higher.