RedWing RC 30cc Mx2
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: st.matthews , SC
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RedWing RC 30cc Mx2
Hello everyone. I am going to put a thread together on the Red Wing RC 30cc Mx2.
This plane is by far one of the best 3d 30cc planes out there.
Take a look at the spec that are awsome.
Wingspan 73"
Wingarea 1025 sq in (66sq dm)
Length 68"
Flying weight 9.5 to 10lbs TRUE AUW!
(with gas set up ours came to 9.7lbs WITH spinner wheel pants EVERYTHING!)
Engine 26cc to 30cc gas
Radio 6ch
This plane is super light!! and IT EVEN COMES WITH A SPINNER!!!!
The 30cc Mx2 also has some very nice Features such as.
Strong and light construction
Carbon fiber wingtube
Foam turtle deck, for super smooth finish
Fiberglass double truss control horns
Ringed Cowl for no external screws
Aerfoiled tail wings - scale and better flight
Prehinged Wings, partially hinged tail
Beautiuful painted fiberglass cowl and wheel pants
High quality Ultra-Cote covering
Full bodied true to scale appearance
Finished cockpit area, requires no work by you
Pre plumbed tank, ready for gas.
You might not believe it but this plane is ready for a tuned pipe!!!!
Yeah thats right. It has a tuned pipe tunnel already running through the bottom of the airplane
Here is some build videos.
Plane overview http://www.youtube.com/user/RedwingR...28/mdnin-aKQb4
Part 1 http://www.youtube.com/user/RedwingR...27/lTuwVHMs2zM
Part 2 http://www.youtube.com/user/RedwingR...26/YZ7UN3Jfv4Q
Part 3 http://www.youtube.com/user/RedwingR...25/UPGdJymXktQ
Part 4 http://www.youtube.com/user/RedwingR...24/-E4fAHMtS34
Part 5 http://www.youtube.com/user/RedwingR...23/W0NWFTa1MF8
Part 6 http://www.youtube.com/user/RedwingR...22/d7f2y8hoWtE
Part 7 http://www.youtube.com/user/RedwingR...21/AgE2qau_9B8
If you have any questions please feel free to ask and I will be happy to answer them
This plane is by far one of the best 3d 30cc planes out there.
Take a look at the spec that are awsome.
Wingspan 73"
Wingarea 1025 sq in (66sq dm)
Length 68"
Flying weight 9.5 to 10lbs TRUE AUW!
(with gas set up ours came to 9.7lbs WITH spinner wheel pants EVERYTHING!)
Engine 26cc to 30cc gas
Radio 6ch
This plane is super light!! and IT EVEN COMES WITH A SPINNER!!!!
The 30cc Mx2 also has some very nice Features such as.
Strong and light construction
Carbon fiber wingtube
Foam turtle deck, for super smooth finish
Fiberglass double truss control horns
Ringed Cowl for no external screws
Aerfoiled tail wings - scale and better flight
Prehinged Wings, partially hinged tail
Beautiuful painted fiberglass cowl and wheel pants
High quality Ultra-Cote covering
Full bodied true to scale appearance
Finished cockpit area, requires no work by you
Pre plumbed tank, ready for gas.
You might not believe it but this plane is ready for a tuned pipe!!!!
Yeah thats right. It has a tuned pipe tunnel already running through the bottom of the airplane
Here is some build videos.
Plane overview http://www.youtube.com/user/RedwingR...28/mdnin-aKQb4
Part 1 http://www.youtube.com/user/RedwingR...27/lTuwVHMs2zM
Part 2 http://www.youtube.com/user/RedwingR...26/YZ7UN3Jfv4Q
Part 3 http://www.youtube.com/user/RedwingR...25/UPGdJymXktQ
Part 4 http://www.youtube.com/user/RedwingR...24/-E4fAHMtS34
Part 5 http://www.youtube.com/user/RedwingR...23/W0NWFTa1MF8
Part 6 http://www.youtube.com/user/RedwingR...22/d7f2y8hoWtE
Part 7 http://www.youtube.com/user/RedwingR...21/AgE2qau_9B8
If you have any questions please feel free to ask and I will be happy to answer them
#2
Senior Member
My Feedback: (1)
Join Date: Mar 2010
Location: Lewisville, TX
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
I have the Goldwing MX2 with a DLE-30, 10.4lbs.Next to theGreg Poe FAGEN schemebeing awsome, I think the twoARFsare almost identical. It's by far my favorite plane at the moment. So fun that I'm going for the 30% version with a DLE-55 next!
#3
Junior Member
Thread Starter
Join Date: Feb 2010
Location: st.matthews , SC
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
Nice. and yes these planes are greatt airplanes. They fly wonderful 3d too. So you are buying the 50cc version? I think you will love that plane too.
Thanks Dustin
Thanks Dustin
#7
Senior Member
My Feedback: (1)
Join Date: Mar 2010
Location: Lewisville, TX
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
ORIGINAL: gamecocks
If I were you I would get the RedWing RC Sbach 342. Its a great airframe for the DLE 55cc.
Thanks dustin
If I were you I would get the RedWing RC Sbach 342. Its a great airframe for the DLE 55cc.
Thanks dustin
I already have a 30% Sbach I will hopefully be flying soon with a DLE55. I got itfrom Tom at WildHare RC. He lives local to meandquit selling these in his line so I got thelast oneI think. Don't know the particularmake of the ARF but it appearswell made. I've heard nothing but good reviews about all the Sbachs out there.
#8
Senior Member
Join Date: Oct 2006
Location: winston,
MO
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
Suren would be nice if you did and maybe post a few video's of you 3D'ing.
I've got 10 or 12 flights on mine now but I took it over to a friend's for him to put the decals on, as I'm lousy at that.
It's by far the easiest plane I've ever flown that locks into a hover, and flies a knife edge.
Though anyone beginning 3D should really buy the fiber landing gear Tim has.
The DLE is way over kill, and I could of gotten a JC28 and also had 1/2 the work on the engine installation.
I've seen a videoT3BEATZ flying this plane and he made it look so easy I just had to buy one
I've got 10 or 12 flights on mine now but I took it over to a friend's for him to put the decals on, as I'm lousy at that.
It's by far the easiest plane I've ever flown that locks into a hover, and flies a knife edge.
Though anyone beginning 3D should really buy the fiber landing gear Tim has.
The DLE is way over kill, and I could of gotten a JC28 and also had 1/2 the work on the engine installation.
I've seen a videoT3BEATZ flying this plane and he made it look so easy I just had to buy one
#10
Senior Member
Join Date: Oct 2006
Location: winston,
MO
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
I got mine last Janauary I have a DLE 30 0n it.
It's the Green Version.
I have it balanced at 4 7/8 for more sport type flying.
It still does 3D at that CG but it makes this plane land like a sport plane.
I've put this plane in some hard stalls and she gently drops her nose.
I've flown alot of planes that snap on a stall but not this one
It's the Green Version.
I have it balanced at 4 7/8 for more sport type flying.
It still does 3D at that CG but it makes this plane land like a sport plane.
I've put this plane in some hard stalls and she gently drops her nose.
I've flown alot of planes that snap on a stall but not this one
#12
My Feedback: (22)
Join Date: Jan 2003
Location: palm harbor,
FL
Posts: 2,232
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
i missed out on a wildhare sale so started looking around and saw mile high rc and fliteworks with 30cc planes at 300dollar mark ..anyone got one and how does flight performance on a goldwing MXS compare say to a SBACH?are they less stable than say a edge 540??I have a DLE30 just itching for a home..just not sure which way to go..
#13
Senior Member
Join Date: Oct 2006
Location: winston,
MO
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
I'm flying the MX2 with a DLE 30. I love this plane.
So gentle yet so radical.
Stalls are straight forward with no tendencies to drop off on a wing tip.
Factory CG makes this plane a sport flyer while a rearward cg turns this plane into the perfect 3D plane.
So gentle yet so radical.
Stalls are straight forward with no tendencies to drop off on a wing tip.
Factory CG makes this plane a sport flyer while a rearward cg turns this plane into the perfect 3D plane.
#14
My Feedback: (22)
Join Date: Jan 2003
Location: palm harbor,
FL
Posts: 2,232
Likes: 0
Received 0 Likes
on
0 Posts
RE: RedWing RC 30cc Mx2
thats the kind of info I wanted..thanks ..I was going after a wildhare extra that was on sale but I missed it and found these planes at a very reasonable price for me.do you do any hard 3D??I love to do knife edge spins and blenders withwaterfalls and etc.I guess I am asking did you fell the need to reinforce any part of the airframe or is it rugged enough on its on merits..