Mr.Extra 260

My Feedback: (11)

Post pictures of your edge and how you did the covering job here.

Ryan Nau

My Feedback: (54)

Edge Pics

Bruce Rolfe

My Feedback: (37)

Here are some pics fo the Wings for my BME EDGE. I traded servos for the covering job from one of our local guys (Steve Watson) He does great work, as you can see.

Bruce

Mr.Extra 260

My Feedback: (11)

Nice jobs! Post some pics of the fuse.

Ken-h

My Feedback: (3)

Here's an Edge from the bottom in classic Zivko colors. Covered in Monocote and Graphic by Bart at Die-Hard.

Ken

sweetpea01

My Feedback: (10)

Plane is currently under repair due to a Prop being sheared off and destroying the cowl and heavily damaged left wing.

Done in Carbon fiber vinyl and white/yellow monokote

Swat Cop

My Feedback: (11)

Its all composite and painted in the mold.

Rcpilot

My Feedback: (78)

Thats a bigun.[sm=thumbup.gif] Nice.

willie b.

My Feedback: (12)

Here's a picture of my edge that I bought wrecked. I stripped all the covering off and repaired the fuse and right wing. I had to order a new canopy. I covered this one in ultracote. I'am using a F.P.E. 111cc twin.


Willie B.

Ryan Nau

My Feedback: (54)

Its 40% Aeroworks Edge 540 with a DA 150.

Goggles

My Feedback: (4)

Fibertech Aviation 36% Edge, ZDZ 100.

Composite fuse painted, foam/balsa wings/stabs covered with 21st century film.

rcblimppro

The airplane was built in '99 but still one of my favorites. All Monokote with Dupont Cromabase/clear on the glass parts.


Shawn

kregan

Before and after.....

Wild Hare 28% all white ultracoat with hand cut
vinyl....

Sorry, the lettering in the crash photo was not hand cut.

The other RIGHT rudder dummy!!!

Mr.Extra 260

My Feedback: (11)

I HATE to see that. Sorry that was a beautiful plane.

Rcpilot

My Feedback: (78)

DOH!![X(] That stinks. Nice plane.

For your next project, I'll expect to see hand cut lettering. Using pre-cut vinyl graphics is cheatin'

These letters are hand cut from monkeykote. Unfortunately, they don't look near as nice as those on your Edge.

hmorad

can someone post a blank stencil (the image that shows the scheme from all sides) of a red bull or a bill hempel edge please<input id="gwProxy" type="hidden"></input><input onclick="jsCall();" id="jsProxy" type="hidden"/>

gboulton

My Feedback: (15)

You caught me about a week too late. Coulda shot my Red Bull Edge and PS'd what you need.

Alas, it went in last Friday, and is now uncovered, being rebuilt.



I do, however, have quite a few shots through arrival, assembly, and some flying shots over in this gallery:

http://public.fotki.com/BluesConvert...dhare-edge-54/

Not everything you were looking for, I'm afraid, but maybe they'll help.

mrbigg

My Feedback: (21)

Here's mine.

Toolman-RCU

My Feedback: (10)

My own design on my BME Edge. This is my third ARC with this color combo.

JoeAirPort

My Feedback: (41)

BME/PAU Edge II. On its 4th season with another owner.

EXTREME FLIGHT

New 50cc Edge 540T and 48 inch electric Edge 540T EXP.

sweetpea01

My Feedback: (10)

Here's one I got outta the trash can. Fixed it and recovered it. Sold it though prior to painting the cowl.

gboulton

My Feedback: (15)

Haven't seen a model of it yet...but just discovered my next scheme for one of the 3 Edges in my shop right now...





Melissa Andrzejewski Pemberton

[ul][*] United States Unlimited Aerobatics Team Member 2006-2007 As The Youngest Female Ever[*] 4 Time Winner Of The "Pitts Trophy"[*] Collegiate Aerobatic Champion 2004 And 2006
[/ul]

That's one of the prettiest schemes I've ever set eyes on, imo.