3D Heckler
05-19-2004 | 11:58 AM
#2
My Feedback: (21)
Joined: Jul 2002
Posts: 7,350
Likes: 0
Received 0 Likes
on
0 Posts
From: Spencerport, NY
RE: 3D Heckler
Can you point us to a website? Just by looking at the airplane's specs, someone should be able to provide you with an electric power system that'll make the plane fly SWEEET 
05-21-2004 | 12:36 AM
#3
Thread Starter
Senior Member
Joined: Dec 2002
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
From: Sumner,
WA
05-21-2004 | 08:52 AM
#4
Senior Member
Joined: May 2003
Posts: 1,012
Likes: 0
Received 0 Likes
on
0 Posts
From: Atlanta, GA
RE: 3D Heckler
This looks to be just a bit lighter than the Modeltech Magic and a slew of those have been converted. It looks like a good candidate for either an AXI 4120 or a Mega 22/30/2 geared.
If it will clear a 15X10:
I recommend a Mega 22/30/2 geared 3.33:1 on a 4S4P or 14 sub C nimhs
If it will clear a 16X10:
I recommend the same motor and battery geared 4:1 instead
AUW electric should be about 71 oz (Glow should be about 64 fueled)
The above combos will give you about 120 oz of thrust. or a 1.6:1 Thrust to weight ratio.
[link=http://epowerflight.com/video/UCDfinal.wmv]Video link of a Mega 22/30/2 in a UCD 46[/link] at an AUW of 6 pnds to give you a comparison
If it will clear a 15X10:
I recommend a Mega 22/30/2 geared 3.33:1 on a 4S4P or 14 sub C nimhs
If it will clear a 16X10:
I recommend the same motor and battery geared 4:1 instead
AUW electric should be about 71 oz (Glow should be about 64 fueled)
The above combos will give you about 120 oz of thrust. or a 1.6:1 Thrust to weight ratio.
[link=http://epowerflight.com/video/UCDfinal.wmv]Video link of a Mega 22/30/2 in a UCD 46[/link] at an AUW of 6 pnds to give you a comparison
