G3 or 3.5 electric twin setup
10-27-2006, 02:04 PM
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Aug 2002
Location: anchorage,
AK
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
G3 or 3.5 electric twin setup
Hello, Im trying to set up the twin star as electric with my power plant Im going to use on my Dash 8 project. When I put in the axi 2820-12 motors, 3s2p 4100 lipos, and 10in prop config its way under powered and doesent pull many amps or have much thrust. it will barely get in the air. I then electrified the nextstar with this motor, lipo and prop set up and it works very well. The only way I can get the twin star to fly is with a 3s 4 or 6p and 12 or 13inch props. The amps are still only in the 20s. If followed twin conversions with my power setup and they fly better than I can get the twin star to move. Any tips or ideas greatly appreciated, Thanks
