stalling saito 150 solution
08-07-2014 | 05:05 PM
#1
Thread Starter
My Feedback: (5)
Joined: Feb 2003
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
From: Lake Ariel,
PA
stalling saito 150 solution
Simple tappet adjustment followed up with a little fine tuning on idle needle valve brought the frustration to an end.
Had never done this before as I do not keep models very long. Wish the 180`s I have used were as "whisper quiet"
at idle. Putting together "Fly Model sbach300" using 180 and will invert same for first time. Have always side mounted
saito`s with good results. Best starting and running engine ever used = Z. G-62 one flip if well primed. For those who think
large print is shouting ( give me a break) "octogenarian`s like myself (guys in their 80`s) appreciate it. Guess that's why
RCU provides numbers up to 6 A good neighborhood library will have an entire room stocked with books with only
large print. Mayors and governors are telling people how much and what to eat and drink and what type light bulbs they
must use. When you begin telling people how to write you are approaching the absurd.
Had never done this before as I do not keep models very long. Wish the 180`s I have used were as "whisper quiet"
at idle. Putting together "Fly Model sbach300" using 180 and will invert same for first time. Have always side mounted
saito`s with good results. Best starting and running engine ever used = Z. G-62 one flip if well primed. For those who think
large print is shouting ( give me a break) "octogenarian`s like myself (guys in their 80`s) appreciate it. Guess that's why
RCU provides numbers up to 6 A good neighborhood library will have an entire room stocked with books with only
large print. Mayors and governors are telling people how much and what to eat and drink and what type light bulbs they
must use. When you begin telling people how to write you are approaching the absurd.
08-08-2014 | 04:44 PM
#2
Junior Member
Joined: May 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I Agree with Wingbolt. Large print is not yelling. bobval1
Simple tappet adjustment followed up with a little fine tuning on idle needle valve brought the frustration to an end.
Had never done this before as I do not keep models very long. Wish the 180`s I have used were as "whisper quiet"
at idle. Putting together "Fly Model sbach300" using 180 and will invert same for first time. Have always side mounted
saito`s with good results. Best starting and running engine ever used = Z. G-62 one flip if well primed. For those who think
large print is shouting ( give me a break) "octogenarian`s like myself (guys in their 80`s) appreciate it. Guess that's why
RCU provides numbers up to 6 A good neighborhood library will have an entire room stocked with books with only
large print. Mayors and governors are telling people how much and what to eat and drink and what type light bulbs they
must use. When you begin telling people how to write you are approaching the absurd.
Had never done this before as I do not keep models very long. Wish the 180`s I have used were as "whisper quiet"
at idle. Putting together "Fly Model sbach300" using 180 and will invert same for first time. Have always side mounted
saito`s with good results. Best starting and running engine ever used = Z. G-62 one flip if well primed. For those who think
large print is shouting ( give me a break) "octogenarian`s like myself (guys in their 80`s) appreciate it. Guess that's why
RCU provides numbers up to 6 A good neighborhood library will have an entire room stocked with books with only
large print. Mayors and governors are telling people how much and what to eat and drink and what type light bulbs they
must use. When you begin telling people how to write you are approaching the absurd.
