muffler spacers
01-12-2004 | 05:51 PM
#1
Thread Starter
Member
Joined: Jul 2002
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
From: palm desert,
CA
muffler spacers
Anyone have a source for a muffler spacer for the Tower 75? I need about 1/4 inch more for the muffler to clear the fuselage on my bird, othewise I have to go with a pits. Thanks for any help.
01-12-2004 | 07:26 PM
#2
Senior Member
RE: muffler spacers
Don't think anyone makes said spacer. But I could be wrong.
If you can find a souce of aluminum the thickness you require, you can make your own spacer. That is if you have the tools to do so. Band saw with the proper blade, and a drill press. Plus a good flat hand file. I've made my own.
Otherwise go with the Pitts muffler. [&:]
If you can find a souce of aluminum the thickness you require, you can make your own spacer. That is if you have the tools to do so. Band saw with the proper blade, and a drill press. Plus a good flat hand file. I've made my own.
Otherwise go with the Pitts muffler. [&:]
