Problems with Webra 32 FH solved
12-08-2002, 12:05 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2002
Location: Fury, CO,
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Problems with Webra 32 FH solved
Hi , guys
some feedback from my last week's queries , The loss of power problems with my webra 32 FH heli engine has been resolved . I cleaned out the carb , found some small pieces of fluff , could be the problem , but I also took the advice from some postings on this site and adjusted my main needle click for click and waalaa problem solved , I was to aggressive with my tunning of this engine previously , i turned with +/- 5 clicks.
I did have another bad experience , my muffler ripped of from the welded section that joins the muffler to the engine on the muffler side.
some feedback from my last week's queries , The loss of power problems with my webra 32 FH heli engine has been resolved . I cleaned out the carb , found some small pieces of fluff , could be the problem , but I also took the advice from some postings on this site and adjusted my main needle click for click and waalaa problem solved , I was to aggressive with my tunning of this engine previously , i turned with +/- 5 clicks.
I did have another bad experience , my muffler ripped of from the welded section that joins the muffler to the engine on the muffler side.
