I'm having trouble figuring out which spinner adapter I'd need for an aluminum Tru-Turn spinner for the Saito 125 on Horizon's site. Can someone more knowledgable than myself show me which one I need?

Seems to me it IS a stupid question when you can go directly to the Tru-Turn site [link=http://www.tru-turn.com/]here[/link] and check for yourself. Horizon isn't necessary.

Bill.

Not necessarily. I ordered a spinner for my Saito 82 from my LHS a while back based on the info I got from Tru-Turn's website. When it didn't fit properly with the props I intended to use I e-mailed Tru-Turn with a few questions. The response I got was that since I was using the spinner on a four stroke ( I DID order the recommended adapter for the Saito 82 ) that I would need to order the "120 slot" Ultimate spinner and a different adapter and that the standard spinner I already had could not be made to work with my intended props ( 12.5x9 and 13x8 APC). I wound up re-ordering pretty much everything.

Wraith, it might be a good idea to contact Tru-Turn with your requirements and get the correct part numbers from them.

Dave

Sorry, didn't make myself clear. My intention was to suggest orfering directly from Tru-Turn.

Bill.