Community
Search
Notices
Glow Engines Discuss RC glow engines

evolution 46 tuning help

Thread Tools
 
Search this Thread
 
Old 04-20-2008 | 12:05 PM
  #1  
Thread Starter
Junior Member
 
Joined: Jan 2006
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
From: guymon, OK
Default evolution 46 tuning help

I put my evolution 46 on my tribute. I can get it tuned on the ground at full throttle but when I pick the nose straight up it starts to serge. So I tune it again and get it to running good both ways on the ground, but after take off it starts to serge. I put a new A-3 plug in it and a tower muffler on it. Need help
Old 04-20-2008 | 01:45 PM
  #2  
Senior Member
 
Joined: Jul 2006
Posts: 723
Likes: 0
Received 0 Likes on 0 Posts
From: Charlottesville, VA
Default RE: evolution 46 tuning help

It sounds like an air leak somewhere. I would carefully check and/or replace all the fuel line, including inside the tank.
Old 04-20-2008 | 03:52 PM
  #3  
blw's Avatar
blw
My Feedback: (3)
 
Joined: Mar 2004
Posts: 9,449
Likes: 0
Received 2 Likes on 2 Posts
From: Opelika, AL
Default RE: evolution 46 tuning help

Good choice in plugs and muffler!

The fuel line from the remote needle valve to the carb is the first thing I would replace. Is the carb tight in the crankcase?

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.