DaveB

I am looking for the drawings for a model called "Shriek". It was designed by Ron Neal and kitted by Model Dynamics, Orange, CA.
The intent is to build a new one, so I would be looking for rib and former patterns, etc.

This RC model can best be described as a flying wing. The engine is mounted high on the vertical fin and is controled by elevons.
It is a 40 sized plane and was produced possibly in the 70's, but I don't know for sure.

Any help appreciated.

DaveB

scalebldr

My Feedback: (7)

hello,
this was the model that won the 1972 northrop fling wing contest.it uses a .45 size engine mounted on a pod above the engine and uses trike gear.I can help you out with what you are looking for e-mail or p.m me for specific details.

Dave 700

I have a Gryphon kit if you are interested. It is the unpowered version. Wood is all cut and sanded to nice to assemble.

Dave 700

DaveB

Dave 700,
Thanks for the reply. Have found patterns for the powered version so I am not interested in the Gryphon.

Thanks again,

DaveB

lch1780

My Feedback: (37)

im looking to find the cg of the shriek any help would be great
thanks guy [email protected]

Flyer970

Hello, I realize this is a very old thread, just wondering if DaveB still has the patterns for the Shriek?

DaveB

Sorry, I do not have the patterns for the Shriek. Actually, I was searching patterns for a friend who has long since passed away. I was successful in obtaining the patterns and the plane was built and flown. I don't recall where the patterns were obtained. Keep looking, you will eventually find them.

DaveB

Hemikiller

My Feedback: (125)

http://www.rcgroups.com/forums/showt...ghlight=shriek