Reflection parts
#1
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Cameron,
WI
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
Reflection parts
I got a relection flatout for christmas, and started building it last night. When I got to the putting the hinge retainer rings(c3) on the wing trailing edge tubes, I found that there weren't enough rings, I was two short. Looking back through the manual I see on the kit contents list the rings as only having 10 when the kit takes 12.
I went to the Great Planes Manual page to see if there were any tech notices or corrections, and nothing.
So the kit isn't totally complete, a few minor parts are left out. Is there anything else that I should be aware of that might be left out of the kit or manual? -John
I went to the Great Planes Manual page to see if there were any tech notices or corrections, and nothing.
So the kit isn't totally complete, a few minor parts are left out. Is there anything else that I should be aware of that might be left out of the kit or manual? -John
#2
My Feedback: (11)
RE: Reflection parts
No parts should be left out of the kit. If you're missing parts, you can call Product Support for them at: (217) 398-8970, or send an email to:
[email protected]
[email protected]