RCU Forums - MX Pro seesaw ?

RCU Forums (https://www.rcuniverse.com/forum/)

- Helimax (https://www.rcuniverse.com/forum/helimax-462/)

- - MX Pro seesaw ? (https://www.rcuniverse.com/forum/helimax-462/6326660-mx-pro-seesaw.html)

dtacmed

09-04-2007 01:25 PM

MX Pro seesaw ?

Does the seesaw use 1 or 2 screws and spacer to hold it to the main head. Diagram shows 1. I crashed and broke the main head where the screw (s) goes through only recovered 1 screw and spacer

Thanks

osterizer

09-04-2007 04:32 PM

RE: MX Pro seesaw ?

It needs one on each side. You can get them from Tower, but if you have $35 lying around go for the bearing head instead. It's a lot nicer because it doesn't have the standoffs to wear out and bind.

dtacmed

09-05-2007 09:15 AM

RE: MX Pro seesaw ?

Bearing Head ? do you have a part number or description.

Thanks

osterizer

09-05-2007 07:31 PM

RE: MX Pro seesaw ?

Sure, sorry. Right here: http://www2.towerhobbies.com/cgi-bin...?&I=LXMRF4&P=Z

HeliMax part number HMXE8609.

All times are GMT -8. The time now is 06:28 PM.