Hello guys,

Basically i want to use my Optic6 with my BladeCP... My bladeCP works somewhere in the range of 72... MHz (I don't have the frequence somewhere here now ).

I've heard that i can buy a SPECTRA module that will allow me to adjuct the frequence in which the my Optic6 transmitts. Is this possible? Do i need to buy something else ? Will i need to change my Blade's receiver?

Thank you in advance.

That is true, however beware of the Optic Spectra GLITCH. go to Hitec RCD and look in the Hitec Forum fot a post labled Optic 6 glitch to learn more http://www.hitecrcd.com/cgi-bin/ulti...c;f=1;t=000999

Yes, the Spectra modules offer the flexibility of channel assignment by the end user...

There is some concern with the Optic and the Spectra TX modules. Our revised Spectra TX module case is a wee bit smaller physically which allows the module to rock. Earlier Spectra modules are not of concern only new release stuff. Hitec offers a new rear case halve for Optic owners with this conundrum.

I would steer clear of the Optic 6 with the spectra module. They are very poor quality products and need to be serviced by the manufacturer seemingly every 60 to 120 minutes of flight time.

This product is bad. Save your airplanes and get a different TX.

BMonee