RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Hitec/MultiPlex Radios- Ask Hitec Customer Service (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/)
-   -   Hitec Eclipse Programing (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/6239997-hitec-eclipse-programing.html)

Leslie Ward 08-14-2007 11:44 PM
Hitec Eclipse Programing
 
I am in the process of setting up an EZ Glider elec. RR, and would like to have ,

1: Spoilerons
2: Throttle proportional on the stick ( Is this possible )

Manual says motor controlled with gear switch on channel 3 ( On/Off )
Using an Electron 6 rx, Eclipse 7 tx

Aloha, Les

A.T. 08-15-2007 01:45 AM
RE: Hitec Eclipse Programing
 

ORIGINAL: Leslie Ward I am in the process of setting up an EZ Glider elec. RR, and would like to have , 1: Spoilerons 2: Throttle proportional on the stick ( Is this possible )
Manual says motor controlled with gear switch on channel 3 ( On/Off ) Using an Electron 6 rx, Eclipse 7 tx Aloha, Les
No problem, use "Acro" mode and set up flapperons with up in lieu of down.
Plug ESC into Ch3 = normal throttle function and ailerons/spoilerons as "Flapperons" as per page 26 of your manual - use the "UP" = spoilerons.
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links


All times are GMT -8. The time now is 10:16 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.