savage throttle linkage

Reply Subscribe

Thread Tools

Search this Thread

02-15-2008, 01:35 PM

talk to me borris

Member

Thread Starter

Join Date: Nov 2007

Location: Cardiff, UNITED KINGDOM

Posts: 48

Likes: 0

Received 0 Likes on 0 Posts

savage throttle linkage

i cant get my savage started because the top arm on the servo does not move enough to open the carb...whereas the lower servo arm is moving towards the engine alot...is it a problem with my servo or linkages??

any input would be appreciated

Reply Like

02-15-2008, 02:13 PM

childsplay999

Junior Member

Join Date: Nov 2007

Location: abby, BC, CANADA

Posts: 14

Likes: 0

Received 0 Likes on 0 Posts

RE: savage throttle linkage

check to make sure that the screw on your throttle mix arm isn't too tight and binding. can you move the carb slide by hand?

Reply Like

02-15-2008, 03:44 PM

azzman

Senior Member

Join Date: Feb 2005

Location: Auckland , NEW ZEALAND

Posts: 1,668

Likes: 0

Received 0 Likes on 0 Posts

RE: savage throttle linkage

Mate the best thing you can do is the ofna linkage mod...do a search you will find heaps of information...

Reply Like

02-15-2008, 07:06 PM

KILL--ROY

Senior Member

Join Date: Mar 2006

Location: , NC

Posts: 425

Likes: 0

Received 0 Likes on 0 Posts

RE: savage throttle linkage

Quote:

ORIGINAL: talk to me borris

i cant get my savage started because the top arm on the servo does not move enough to open the carb...whereas the lower servo arm is moving towards the engine alot...is it a problem with my servo or linkages??

any input would be appreciated

You need to reverse your servo, there is a switch on the transmiter.