|
Does anybody make 17mm hub adapters...
With the 17mm nut,that isnt purple.I found some for the hellfire,do they fit?Thanks for any help.
|
RE: Does anybody make 17mm hub adapters...
i think you gotta get the nubs conversion kit
http://www3.towerhobbies.com/cgi-bin...&I=LXLMD8&P=SM nope poke around thier you'll find all you'll need to do the converstion with out ending up with new tires and the lug |
RE: Does anybody make 17mm hub adapters...
Thanks Lug,dang i still cant find anything.Ive got black Maximizers on the way,and i cant have any damn purple on my truck.Last time i checked this was a male dominated hobby,why in Christ's name is purple even an option?Say,does anybody know the "de-anodizing"process,at the least ill buy purple and find a way to get that crap off there.
|
RE: Does anybody make 17mm hub adapters...
i knew some one had a post about that a few weeks ago i'll try to find it
yup here it be http://www.rcuniverse.com/forum/m_75...tm.htm#7552271 the lug |
RE: Does anybody make 17mm hub adapters...
Awww nice,thanks alot Lug i appreciate it.
|
RE: Does anybody make 17mm hub adapters...
[sm=48_48.gif][sm=48_48.gif]not at all i'm board outa my skull playin' pebble dash so i figured 1 min of searching can't hurt
http://www.miniclip.com/games/pebble-dash/en/ for all you board people after you aim wait a bit.... the lug |
RE: Does anybody make 17mm hub adapters...
What color are you looking for? i have colorless and gold
|
RE: Does anybody make 17mm hub adapters...
I have no idea who might make such a thing
*giggle* http://i23.photobucket.com/albums/b3...lmostdone3.jpg Parts list: 8mm buggy-style axle for Savage 17mm buggy-style hub conversion kit (cannot use normal 1/8 buggy axles...I tried...and wasted $20[:@]) 86393 x 2 http://www3.towerhobbies.com/cgi-bin...6393&search=Go 3mm dia pin for Hellfire axles to hold the hex on the axle Z272 x 1 http://www3.towerhobbies.com/cgi-bin...z272&search=Go M5 grub screws Z741 http://www3.towerhobbies.com/cgi-bin...?&I=LXFKN0&P=7 3mm drill bit to drill out the 2.5mm hole that's already in the 17mm hubs, because if you don't there's gonna be an UN GODLY amount of slop Can't find one at Tower, or on Harbor Freight's website, but i found a metric drill set that I used while perusing Harbor Freight. was like $8 and, last but not least...1/8 buggy 17mm hubs of your choice:D I used what was on the LHS's shelf at the time...no idea who made them, and don't care either:D You can also buy those parts, and substitute the 17mm hubs for LST2/Mammoth ST 23mm adaptors (IN THEORY, I have not tried this...YET:D) I went through THAT much trouble to get these parts to avoid the purple hubs. Oh well:D |
RE: Does anybody make 17mm hub adapters...
ORIGINAL: robo5 What color are you looking for? i have colorless and gold |
RE: Does anybody make 17mm hub adapters...
purple can be cool but it takes the right trim schem and hpi don't got it, it needs to be a much darker purple if at all, they need like black crome or something
the lug |
RE: Does anybody make 17mm hub adapters...
ORIGINAL: ThunderbirdJunkie I have no idea who might make such a thing *giggle* http://i23.photobucket.com/albums/b3...lmostdone3.jpg Parts list: 8mm buggy-style axle for Savage 17mm buggy-style hub conversion kit (cannot use normal 1/8 buggy axles...I tried...and wasted $20[:@]) 86393 x 2 http://www3.towerhobbies.com/cgi-bin...6393&search=Go 3mm dia pin for Hellfire axles to hold the hex on the axle Z272 x 1 http://www3.towerhobbies.com/cgi-bin...z272&search=Go M5 grub screws Z741 http://www3.towerhobbies.com/cgi-bin...?&I=LXFKN0&P=7 3mm drill bit to drill out the 2.5mm hole that's already in the 17mm hubs, because if you don't there's gonna be an UN GODLY amount of slop Can't find one at Tower, or on Harbor Freight's website, but i found a metric drill set that I used while perusing Harbor Freight. was like $8 and, last but not least...1/8 buggy 17mm hubs of your choice:D I used what was on the LHS's shelf at the time...no idea who made them, and don't care either:D You can also buy those parts, and substitute the 17mm hubs for LST2/Mammoth ST 23mm adaptors (IN THEORY, I have not tried this...YET:D) I went through THAT much trouble to get these parts to avoid the purple hubs. Oh well:D |
RE: Does anybody make 17mm hub adapters...
Integy has some 23mm adaptors, and pre-mounted 23mm wheels/tires that can be had for fairly cheap. I'm thinking about grabbing a set when I destroy this new set of rubber. Or maybe before, who knows...but the 23mm adaptors have to be for the Hellfire/LST2/Mammoth ST.
the CEN truggy may work, too, since it has them stock, it may be cheaper...but I'd have to know beforehand whether it took a 2.5mm or 3mm pin, since the pins for the 17mm hubs won't work as well. |
| All times are GMT -8. The time now is 07:20 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.