Since I have been unable to get answers to my questions in other forums, I thought I would post directly here hoping that someone out there will take pity on me and get back to me with some sort of answer (a correct one is preferred rather than some sort of heckle).

First: I have been getting the graphics error upon loading and will probably have to replace my video card. No problem. I just have to choose from the short list of supported video cards. Anyone out there have a preference? My PC supports PCI and is a Pentium IV 1.8 Gig with 512 Meg Ram.

Second: My transmitter. I have two issues here, hopefully someone can clarify this for me. First is that I have the RealFLight G2 USB Interface transmitter. Will that work? If so, how? Secondly, I have two regular RC transmittes, both Airtronics. One is the RD6000 the other is the RD8000. Neither are recognized with the interface cable sent to me with the AFPD. Any suggestions?

Direct replies can be left here or sent to my personal Email account which is [email protected]

Thanks

Dick Soucy

Dick, I have a Radeon 9800 pro which works great with AFPD - picked mine up as a refurb from newegg.com for abt 150.
(Although its an AGP card, so you would need an agp slot on your mb)

Hi.

Well, you're absolutely right. I picked up the new Radeon 9800 Pro video card with 128 Meg ram. Now it works just fine. I am using the G2 controller and it works great. I am going to play with it to see if it will accept my input from the RD8000 Airtronics. We'll see. But, if it works with the G2 Interlink, then I am a happy camper, which it does, and of course I am.

Thanks for the input.

Dick.