Kit for IMAC precision
04-02-2006 | 06:56 PM
#1
Kit for IMAC precision
Hello,
I have been looking but to no avail so I am asking for help. I would like to buy a full build kit or plans for a plane to fly IMAC with. I am not really that interested in 3D at this point so it can by an older design. I do have two stipulations I do not want an Extra or a Cap and the Fuselage length should be as close to 90" without going over that as possible. Anyone got any ideas
Thanks
Crash[sm=drowning.gif]
I have been looking but to no avail so I am asking for help. I would like to buy a full build kit or plans for a plane to fly IMAC with. I am not really that interested in 3D at this point so it can by an older design. I do have two stipulations I do not want an Extra or a Cap and the Fuselage length should be as close to 90" without going over that as possible. Anyone got any ideas
Thanks
Crash[sm=drowning.gif]
04-03-2006 | 08:43 AM
#2
Joined: Sep 2003
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
From: mooresville,
NC
RE: Kit for IMAC precision
Here's a link to our Panzl 330
http://www.jtecrc.com/35%25%20panzl%20page.htm
you can check out the plane on our support page here on RCU or give me a call for additional information at 704-799-1658
Al Young
JTEC/RADIOWAVE
http://www.jtecrc.com/35%25%20panzl%20page.htm
you can check out the plane on our support page here on RCU or give me a call for additional information at 704-799-1658
Al Young
JTEC/RADIOWAVE
