RCU Forums - carb settings

RCU Forums (https://www.rcuniverse.com/forum/)

- IRC Racing Support (https://www.rcuniverse.com/forum/irc-racing-support-448/)

- - carb settings (https://www.rcuniverse.com/forum/irc-racing-support-448/5049971-carb-settings.html)

can any tell me the stock carb settings on the vulcan se?

RE: carb settings

Does anybody know what the stock carb setting are?

RE: carb settings

Sorry, I thought I replied to your first post...
I will get them posted again for you today.

RE: carb settings

4 turns out on hsn, 2 1/2 turns out on lsn.. atleast i think.

RE: carb settings

Thanks for the help guys

RE: carb settings

I think the 2.5 on the LSN is correct, but you can probably go lower than 4 on the HSN... You will need to adjust that one based on your environment... anywhere between 2 and 4 is acceptable.

If you are having troubles keeping it running and/or starting there may be another issue.
On mine the idle screw (the one that prevent the carb from closing all the way) was in too far... that meant the smallest opening in the carb at idle was large.
Turn that screw out until your carb can close with a 1mm opening... this should be your idle condition.
If this isnt clear then let me know and I will post a picture to illustrate.