RCU Forums - Need help with P-70

Well, to start this turbine has been flawless that is until this weekend of course when we had our annual fun fly. I am not sure what exactly is going on, but the turbine will not start. It just spins over but will not ignite or begin any of the normal start up functions. I have started this turbine many, many times and it always starts normally. Now, after putting a huge damper on my weekend I need to figure out what is going on. When looking at the GSU during start up, the battery voltage shows the battery is fine (this is a new battery by the way). When I begin to try and start the turbine, the battery voltage goes to 0 and the little battery symbol shows it is "empty". Now, I have tried other batteries and it does the same thing. Also, if I look at the RPM's, they are showing 0 as well even though I can hear and see that it is spinning over. So, as long as the RPM's are showing 0, the start up will not happen. So, what the heck is going on and how does one go about getting this resolved. I will try to post a short video of this as well.

Jason