Red Raider

My Feedback: (86)

I bought 2 JR 921 receivers. These are DSM-2. My transmitter is a JR 9503 DSM-X. Both of these receivers will bind easily to my transmitter, but neither one will transmit signal to the servos. I've re-binded them both several times. At the time I was trying to set up some Robart electric retracts in a new build. After I couldn't them to work, I plugged in various servos in different channels, and nothing. Then, I pulled out an old Spektrum 7000, it bound to my radio, and all channels work like they're supposed to. What am I doing wrong?
SS

moparherb

My Feedback: (7)

Do you have a remote? I believe the 921 must have a remote receiver. Remember the remote must also be DSM-2.

Red Raider

My Feedback: (86)

Yes. Both have remotes that came with the receivers. I remember checking to make sure that they were matched. Both the main and the remote receivers bind to the transmitter just like they're supposed to.

grizzly59

One or more of your servos wires are plugged in back in backwards.

Red Raider

My Feedback: (86)

Thanks. I'll take a look at that. It must be something germaine to the receivers that I did consistently with both receivers.