Assigning D/R's to a single switch 9303 2.4
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: corona del mar,
CA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Assigning D/R's to a single switch 9303 2.4
I just received my 2.4g 9303 and really like it. I do have one question - how do I assign all of my D/R's to a single D/R switch. In the DX-7 this is really easily accomplished but on the 9303 I cannot find how to do this. Any insights?
Scott
Scott
#4
Senior Member
Thread Starter
Join Date: Nov 2003
Location: corona del mar,
CA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
RE: Assigning D/R's to a single switch 9303 2.4
Still do not see how to assign all D/R's to a single D/R switch. I can program and assign a F/M to the three position flap switch, etc, but there seems to be no way to assign D/R's to a particular device switch.
Scott
Scott
#5
Senior Member
Join Date: Jul 2003
Location: Slough, UNITED KINGDOM
Posts: 1,415
Likes: 0
Received 0 Likes
on
0 Posts
RE: Assigning D/R's to a single switch 9303 2.4
You assign the Dual Rates to the Flight Mode switch, set the relevant rates in each of the seperate Flight Modes.