ARFT Hickup !!!!!!!!!!!
08-11-2003 | 08:21 PM
#1
Thread Starter
Senior Member
Joined: Jul 2003
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
From: UK
ARFT Hickup !!!!!!!!!!!
Hi,
Hope someone can clear a little problem ive got, i was putting together my GP SuperSports Star 40 ARFT plane, but when i was epoxying the tail on it seems to be slightly off centre, not much at all but im fussy lol, you cant notice it when the elevator fins are attached on the hinges.
The question is will this be ok to fly it like that ? slightly off centre ie : can it be adjusted on trim on the radio if i get any problems, or do you suggest undoing it and redoing it of which i have no clue how to do that !!!!!!!! as it seems as hard as rock.........
By off centre i would probably take a guess at about 1/6 of an inch if that.
Any feedback would be appreicated. Thx
Hope someone can clear a little problem ive got, i was putting together my GP SuperSports Star 40 ARFT plane, but when i was epoxying the tail on it seems to be slightly off centre, not much at all but im fussy lol, you cant notice it when the elevator fins are attached on the hinges.
The question is will this be ok to fly it like that ? slightly off centre ie : can it be adjusted on trim on the radio if i get any problems, or do you suggest undoing it and redoing it of which i have no clue how to do that !!!!!!!! as it seems as hard as rock.........
By off centre i would probably take a guess at about 1/6 of an inch if that.
Any feedback would be appreicated. Thx
