There is a real good guy named Pete on F/G, if you email him at this Email address he sends free plans for the aircraft listed below. [email protected]



40% Clipped Wing Monocoupe 110 (post # 1)
30% mid wing Cap 232 (experimental project) (post # 9)
30% Edge 540 (post # 38)
30 to 40cc size Gee Bee R3 racer (post # 78)
30 to 40cc Yak 54 (post # 122)
55% Giles 200 (post # 134)
44" Electric Flying Wing (post # 142)
28% Clipped Wing Monocoupe 110 (post # 158)
30% Extra 300S (post # 177)
33% Terzi T30 Katana (post # 179)
Night Dragon electric powered RC Slow Flyer (post # 238)
94.5" Giant Sundown Solution (post # 250)
100cc Gee Bee R3 (post # 360)

Future plans to be posted not including new versions of the above.
25% Sbach 300 electric and gas versions
30% Sukhoi 26M
35% Edge 540
35% Extra 300
37.5% Yak 54
40% Extra 260
42% Cap 232
43% Edge 540
Several civilian and war birds depending on popularity.
I am hoping to post all plans new and updated around the same time to make searching and choice easier.


Bob

sensei,

Do you happen to know if all these FREE plans are full size ready to use for building a model ?

Are they all in the public domain (no copyright infringement)?

Zor

Ask him yourself

http://www.flyinggiants.com/forums/s...ad.php?t=60678

He draws them all himself and you can email him on the format that he provides you with.

Bob

Thanks guys.

I conclude that all these model structures are his own design.

I suppose we can also conclude that he has built them all and flight tested them.

Kind of him to have printed them and give them away free.

Zor

To find someone with the plans for a YAK 54 is almost unheard of. It's even in the size I was looking for. I will give him a yell and see what it looks like. How nice to have someone go out of there way to be of help to other builders.

<span style="font-family: Comic Sans MS">HECK YEAH, i'm interested!!! may have to find out about sizing them down. not into that 'ginormous' stuff yet.</span>

The only thing Pete is interested in is promoting the building side of our hobby, like I stated in an earlier post, Pete is a good guy!

Bob

You just take the disc or plans to Kinko's and tell them what size you want them printed out to. Some of the places have the percentage wheel so you don't even have to do any of that thinking stuff. If it's an 80 inch wing tell them you want it reduced down to 60 inches and they just set the little wheel at 80 then read what the percentage will be to make it 60 for you. How easy is that??

Sounds good! I'm chcking it out.