House of Balsa 1/2 A Chipmunk Plans needed
#2
I have a guy that I built the Bonanza for, the Chipmunk plans are on the back.
I'll ask him to see if he can scan them and mail it to me. Just send me your email and I should be able to send them to you...provided you're not in too much of a hurry
I'll ask him to see if he can scan them and mail it to me. Just send me your email and I should be able to send them to you...provided you're not in too much of a hurry
#4
Thread Starter
Join Date: Mar 2003
Location: Jupiter, FL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
BTW, I built the P-51 years ago and it flew great, but the swap to a TD 09 really changed things.
#5
The Bonnie I did for a customer last year got a TD .09 in it...he still has to maiden it but first has to find the courage...the bird was done in the colour scheme of his late father's full size so has lots of sentimental value behind it.
#6
Thread Starter
Join Date: Mar 2003
Location: Jupiter, FL
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Is it a 2 channel? MY P-51 was easy to fly with no bad habits....an underhanded hand launch at about 20-30 deg was all it took. And this was all mid 1970's technology. Can you send photos?
Last edited by bob koch; 06-29-2017 at 10:05 PM. Reason: add copy
#10
Bob Koch
You should try to contact Paul Stenberg at House of Balsa. They are in California. I used to have an e-mail address for Paul, but don't know if I could find it? Good luck.
You should try to contact Paul Stenberg at House of Balsa. They are in California. I used to have an e-mail address for Paul, but don't know if I could find it? Good luck.