aileron install question
10-31-2003 | 04:29 PM
#1
Thread Starter
Member
Joined: Apr 2003
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
From: Pincourt quebec,
QC, CANADA
aileron install question
I am building a wing and the ailerons and the beveled edge, that goes against the wing is not cut equally. What I mean is that if you look at the profile of the bevel point is not in the center.
10-31-2003 | 07:50 PM
#2
Senior Member
Joined: Sep 2002
Posts: 2,162
Likes: 0
Received 0 Likes
on
0 Posts
From: Los Angeles,
CA
RE: aileron install question
ORIGINAL: tempus
I am building a wing and the ailerons and the beveled edge, that goes against the wing is not cut equally. What I mean is that if you look at the profile of the bevel point is not in the center.
I am building a wing and the ailerons and the beveled edge, that goes against the wing is not cut equally. What I mean is that if you look at the profile of the bevel point is not in the center.
Don't worry about it.
Have fun!
-David C.
