I have a Top Flight P51D Mustang plane that is about 80% complete right now. My builder that was building this plane for me has health issues and cannot complete the job. I am looking for someone to complete building this plane for me. I have listed below some of the specifications that I have on the plane. If someone is interested in completing this job for me, please contact me at [email protected].

Wing Span: 84.5 inches
Weight (with radio) 17.5-19 pounds
Fuselage length: 73.5 inches
Radio: 6-7 channel
Wing Area: 1245 square inches
Wing loading: 32-35 oz./square feet
Engine: 2.1-4.2 cubic inches

I can be reached at all times via e-mail ([email protected]). If you should have any questions or suggestions as to how I can complete this plane.

Thanks,
Dana (bossplane)

Try contacting a guy named Jim Gressel. His email is [email protected]. His user name here on RC Universe is Zebra. He is a builder and really knows his stuff. Very informative and knowledgable. He has a thread here under products and announcements. Drop him an email I am sure he will help you out.

What part of LA are you in? I'm in Monroe (north east corner). I have almost 15 years in building and have built several warbirds including multi-engine bombers. You can check my site at [link=http://rc_builder.tripod.com]http//:www.rc_builder.tripod.com[/link].

Since you have a large scale bird it would not be a problem to meet you at half way point to save on shipping. The span and fuse length may require motor freight if you were to ship it.

Take a look at my site, there are a few pix and some details on my experience. My phone number, email, and address are on the site so you can contact me if you any questions or want a bid.

Thanks,

Scott