Mods to Great Planes Extra 300 .40 kit?
#1
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Palmyra,
NJ
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Mods to Great Planes Extra 300 .40 kit?
Hey guys,
Has anyone here modified their .40-size extra 300 from Great Planes? Mods such as increased elevator, rudder, or even aileron size? I intend to equip one with a Saito .91 (comparable in weight to the recommended O.S. 70), but much more powerful for...perhaps...3-D?
I'd like to hear anyone's experiences. I realize that it is a great plane stock, but I am looking for enhanced performance.
Thanks!
Has anyone here modified their .40-size extra 300 from Great Planes? Mods such as increased elevator, rudder, or even aileron size? I intend to equip one with a Saito .91 (comparable in weight to the recommended O.S. 70), but much more powerful for...perhaps...3-D?
I'd like to hear anyone's experiences. I realize that it is a great plane stock, but I am looking for enhanced performance.
Thanks!
#2
Senior Member
My Feedback: (4)
RE: Mods to Great Planes Extra 300 .40 kit?
If it's 3-d you're looking for, you'll have to increase the size of all of the controll surfaces.
In my opinion, if 3-D is what you want, switch to a different plane. The 40 size Extra is an excellent kit as is. I wouldn't go overboard modifying it
In my opinion, if 3-D is what you want, switch to a different plane. The 40 size Extra is an excellent kit as is. I wouldn't go overboard modifying it
#5
My Feedback: (51)
RE: Mods to Great Planes Extra 300 .40 kit?
My GP Extra 300s .40 is a great flying Plane built stock from Kit. This Plane is not meant to be a 3D machine, and butchering up a Great Flying Plane like this to try and make it perform like a Funtana would really be a waste of a great kit in my opinion. The only thing I really changed on mine was I used the Sullivan Tail Wheel assembly instead of the stock one, and I braced my Tail Section with Guide Wires. I Plane flies very scale-like with the 52 Magnum 4 stroke I have on mine. A buddy on mine has the same Plane with a Saito 72, and that really seems like Plenty for this Plane. Just my .02 cents.
#7
Senior Member
Thread Starter
Join Date: Dec 2002
Location: Palmyra,
NJ
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mods to Great Planes Extra 300 .40 kit?
Hey guys,
Thank you for your opinions. If I do decide to purchase this kit, I will heed your suggestions and build per the plans.
Barracudahockey,a Funtana would be great, but I am looking to build, and I only know of ARFs for this plane.
Thanks again!
Thank you for your opinions. If I do decide to purchase this kit, I will heed your suggestions and build per the plans.
Barracudahockey,a Funtana would be great, but I am looking to build, and I only know of ARFs for this plane.
Thanks again!
#8
Senior Member
Join Date: Jun 2003
Location: Guelph,
ON,
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mods to Great Planes Extra 300 .40 kit?
GP's Cap will do more 3D than the extra but it needs larger airlerons and weigh 5.5 pounds or less. Similar building style, the wing is practically indentical to the extra but with more dihedral.
Tom
Tom
#9
My Feedback: (51)
RE: Mods to Great Planes Extra 300 .40 kit?
ORIGINAL: RVman
GP's Cap will do more 3D than the extra but it needs larger airlerons and weigh 5.5 pounds or less. Similar building style, the wing is practically indentical to the extra but with more dihedral.
Tom
GP's Cap will do more 3D than the extra but it needs larger airlerons and weigh 5.5 pounds or less. Similar building style, the wing is practically indentical to the extra but with more dihedral.
Tom