Goldberg TIGER 60
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: BuderimQLD, AUSTRALIA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Goldberg TIGER 60
I recently purchased a Goldberg 60 kit in Hong Kong for US$ 60 - an amazing bargain. I intend to put a Saito 100 up front.
Do I need to use the supplied bass wood for the wing main spars. I am not sure it is necessary to use this rellatively heavy wood particularly as the wing has full depth webs.
Any other mods. recomended?
Howard Evans
Do I need to use the supplied bass wood for the wing main spars. I am not sure it is necessary to use this rellatively heavy wood particularly as the wing has full depth webs.
Any other mods. recomended?
Howard Evans
#5
Senior Member
My Feedback: (1)
Join Date: Aug 2002
Location: Kent WA ,
WA
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
RE: Goldberg TIGER 60
Whatever you do at least use the spar wood that came in kit. I replaced mine with Spruce spar wood and was never sorry. Still goes to the moon with the Saito 4 stroke. I also used lite ply for the ribs that hold the landing gear blocks.
dickj
dickj