Laminating
01-15-2006 | 09:00 PM
#1
Thread Starter
Member
Joined: Nov 2003
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
From: West Milford,
NJ
Laminating
I'm building a Sig Fazer and just started the wing, but the first step says to
"Begin the wing construction by laminating four 1/4" sq. x 11" balsa doublers to four 1/4" sq. x 24" wing spars as pictured in the photo."
What does it mean to laminate two pieces together?
Thanks.
"Begin the wing construction by laminating four 1/4" sq. x 11" balsa doublers to four 1/4" sq. x 24" wing spars as pictured in the photo."
What does it mean to laminate two pieces together?
Thanks.
01-15-2006 | 09:08 PM
#2
Joined: Oct 2004
Posts: 571
Likes: 0
Received 0 Likes
on
0 Posts
From: Galesburg,
IL
RE: Laminating
Glue em! Sounds like they mean to double up the inboard portion
of the spar. So the first 11 inches would be 1/4 X 1/2 and the
remaining outboard portion would be 1/4 x 1/4...
Mike Hammer
of the spar. So the first 11 inches would be 1/4 X 1/2 and the
remaining outboard portion would be 1/4 x 1/4...
Mike Hammer
