hey everybody im building the anniversary cub as my very first kit, currently i have the stab,elevator , fin, rudder and fuse built up. so far im very happy
with this kit everthing is going smooth, but i must say i am slightly intimidated with the construction of the wing. i have read and reread the instruction
and theres a few things that i still dont understand,so if the pros are willing to help me out i would be ever so thankfull.

step 2 says place one no.5 rib in rib 3 location on plan, and two more ribs 5 as shown.
my problem here is that the picture is terrible and i cant determine where to place these other ribs.


if anybody who has built one of these things can help or have any other tips on building this wing
would be much appreciated.

thanx

I dont specifcally remember the #5 rib location deal but remember there are sometimes multiples of a rib number, this is usually the shape and not the location. There could be several # 3 ribs or whatever. On a Goldberg Cub there are instructions for a clipped wing version or the standard wing. Read through the instructions very closely while looking at the blueprint, it will usually be easy to figure out. The biggest problem people have with Goldberg Cubs is accidently building 2 right fuselage sides or 2 right wings. Pay close attention to the center section as that is where it gets a little busy. I have built 2 Goldberg Cubs and they are a great first build. Some of the Lazer cut parts dont fit perfectly but a little sanding to square up the parts will make them fit good. Hopefully someone else who is currently building a Cub can help out too.

Sky Hawk here did you ever get the rib 5 work out? I have some photos of mine just before it got coverd.</p>