RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)
-   -   Dynaflite PT19 Plans (https://www.rcuniverse.com/forum/kit-building-121/11628359-dynaflite-pt19-plans.html)

jmpups 04-06-2016 10:23 AM
Dynaflite PT19 Plans
 
Just purchased a Dynaflite PT19 Kit, the plans included 1 sheet for both wing panels and stabilizer, and 1 sheet of the side view of the fuselage. There was no top view of the fuselage. I don't know if this was a early version of this kit or if none of the plans show the top view. If anyone has any info or a set that includes the top view, please contact me. Thanks. [email protected]

Bax 04-07-2016 06:05 AM
The plans set you have is correct. There is no top view of the fuselage. It's really not needed. There are a few cross-section views you can use to help build the fuselage, but the parts are the main guide. Just draw a centerline on the parts and use that against the centerline you draw on your building board to build it straight.

jmpups 04-07-2016 08:35 AM
Thanks

Luft-Gangster 04-07-2016 09:48 AM
Originally Posted by Bax (Post 12199237)
The plans set you have is correct. There is no top view of the fuselage. It's really not needed. There are a few cross-section views you can use to help build the fuselage, but the parts are the main guide. Just draw a centerline on the parts and use that against the centerline you draw on your building board to build it straight.
Ditto - pulled out my NIB kit and plans are the same as your description. Checked my Jim Pepino pans (87" wingspan) it has a top view if you really need one. get the same results with a good 3-view.

Luft-Gangster 04-07-2016 09:53 AM
2 Attachment(s)
http://www.rcuniverse.com/forum/atta...mentid=2156268http://www.rcuniverse.com/forum/atta...mentid=2156269

P. Winters 02-10-2023 10:28 AM
Pt-19
 
Hello,

I am desperate to find the plans for the wing of the Dynaflite PT-19. Any chance I could get yours or a copy of yours? I would gladly pay for it.

Thank you, Patrick

Originally Posted by jmpups (Post 12198921)
Just purchased a Dynaflite PT19 Kit, the plans included 1 sheet for both wing panels and stabilizer, and 1 sheet of the side view of the fuselage. There was no top view of the fuselage. I don't know if this was a early version of this kit or if none of the plans show the top view. If anyone has any info or a set that includes the top view, please contact me. Thanks. [email protected]


All times are GMT -8. The time now is 09:39 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.