balanceing the MidWest Super Stinker biplane
 

Hello I'm in the process of balancing my Super Stinker, I see no datum line on the plans, so do I go by the bottom wing that shows 0 degree incidence. Or by how it looks standing back and saying ok that looks good.
Any insight would be helpful thanks for looking.

When you balance a plane on its CG, the plane should be level front to back and side to side, your lack of Datum line on plans shouldn’t be an issue. Go by the 0 degree incidence on the bottom of the wing. Level (0) is level regardless of where it is taken from. Hope this helps.

Thank you for your imput bin out of it for a feu years getting back in.
Dennis